Features:
Proven Circuit Design
Surface Mount Technology PCB
Strong ABS Enclosure with Mounts
Large Input Voltage Range
Low current draw CMOS Components
100% Made in the USA
INSTALLATION INSTRUCTIONS
1.) Install the Red wire to the positive (+) terminal on your 6 or 12 volt battery.
2.) Install the Black wire to the negative(-) terminal on your 6 or 12 volt battery.
3.) Verify that the red LED is on, you might also be able to hear a “buzzing” noise.
4.) Your done :) Happy desulfating.
NOTE: If you connect the wires incorrectly the internal fuse will blow, pry the back cover
open and replace the fuse with the same type GMA 6amp fast blow rating.
TECHNICAL SPECIFICATION
OPERATION
INPUT VOLTAGE 4.5Vdc – 16Vdc
OUTPUT VOLTAGE 60V (pk-pk) inductive (10uS pulse every 1mS approx.)
RATED CURRENT 45mA Average @ nominal 12Vdc input.
FREQUENCY RANGE .8 – 1.2 KHz. Temperature and input voltage dependant
PROTECTION
OVERLOAD Internal user replaceable 6 amp fuse GMA style, fast blow type.
OVER VOLTAGE None
REVERSE POLARITY Internal Fuse provides limited protection
ENVIRONMENT
WORKING TEMP. 0C ~ +60C (+32F ~ +140F) (+273K ~ +333K)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP. -20C ~ +85C (-4F ~ +185F) (+253K ~ 358K)
VIBRATION MAX. 10-500HZ, 2G 10min./1cycle, Period for 60min. Along X,Y,Z axis
SAFETY
WITHSTAND VOLTAGE I/P – O/P: 3KVAC
ISOLATION RESISTANCE I/P – O/P: 100m ohms / 500Vdc
OTHERS
MTBF 230.7K hours min. MIL-HDBK-217F (+25C)
DIMENSION 91.45mm(L) x 38.10mm(W) x 30.48mm(H) (3.6”L x 1.5”W x 1.2”H)
The manufacturer reserves the right to change these specifications at any time without
notice
