INSTALLATION INSTRUCTIONS
1.) Install the Red wire to the positive (+) terminal on your 6 or 12 volt battery.
2.) Install the Black wire to the negative(-) terminal on your 6 or 12 volt battery.
3.) Verify that the red LED is on, you might also be able to hear a “buzzing” noise.
4.) Your done :) Happy desulfating.
NOTE: If you connect the wires incorrectly the internal fuse will blow, pry the
back cover open and replace the fuse with the same type GMA 6amp fast blow
rating.
| WELCOME TO WIZBANGPLUS.COM THE HOME OF THE ORIGINAL BATTERY DESULFATOR |
 |
| |
 |
| |
 |
| |
 |